Provide the production of Kevlar and PE Ballistic Helmet mold. According to our customers ordering bulletproof helmet moulds, more and more customers are purchasing UHMWPE helmet molds.
Famous armour making companies like OPS-CORE, Team Wendy, 3M and others pick UHMWPE fibres for the making of helmets. The benefit of using UHMWPE was weight savings, while for aramid it is higher protection levels. The manufacturing process of UHMWPE is intense, and not every manufacturing firm picks it up even though it provides weight savings up to 20-30%.
Compression molding is a method of molding in which the molding material, generally preheated, is first placed in an open, heated mold cavity. The mold is closed with a top force or plug member, pressure is applied to force the material into contact with all mold areas, while heat and pressure are maintained until the molding material has cured.
UD/KEVLAR product mould
UHMWPE is commonly known as very high molecular weight polyethylene. Its molecular weight can reach 1 to 5 million. It has high wear resistance, low friction coefficient, high impact resistance, and better sound-absorbing performance. Compared with ordinary thermoplastics, it has lower fluidity and is difficult to process. At present, it can only be produced by molding. Our company cooperated with the *** unit, using its good impact resistance, developed the body armor and bulletproof helmet molds, realized segmented pressurization and heating on a pair of molds, and switched the heating mold to cooling in the later stage of molding. The mold ensures that the product is cooled and shaped to the set temperature and set material hardness, ensuring that the product can be easily taken out of the mold.
MB/Wechat/Whatsapp:+0086-13456489912
sophiemould@foxmail.com
